I had a look at a
Ravenheat CSI Primary boiler today which was not working properly. When the boiler was coming on for the heating and hot water sometimes it would work fine other times it would come on and off frequently. The fan would start up and burner light, running at full power for 30 seconds or so before the fan and burner would cut out. Then the process would start over again, occasionally going to low flame after the initial high flame. Sometimes the fan would only run for a few seconds before cutting out.
This is quite a common issue on these boilers and not the first time the fan control PCB has been replaced. I replaced the
fan control PCB which has solved the problem.
Disclaimer:
The works
described in this blog are a record of work undertaken and should
not be taken as guaranteed to solve your problem.
Work
should only be carried out by persons qualified and competent to
do so. |
The thought of your article is pretty distinctive which is a good factor in driving more visitors to visit your site.I even told my friends to take a look at your post and in fact your blog is already bookmarked on my computer. Hope to see more of this. Keep it up. plumber in blackpool
ReplyDeleteThe above is a very knowledgeable short note on combi boiler working. It has provided a good base of understanding working and usefulness of combi boiler.
ReplyDeletewoo! your blog is very interesting because of that your blog have great information. and our company is a best Boiler Installation Aberdeen services provider in United Kingdom.
ReplyDeleteAmazing! your blog is very interesting because of that your blog have useful information about the boilers. And our company provide a best Boiler Installation Liverpool services in United Kingdom.
ReplyDelete